Cable termination • Cable termination • Carefully remove the jacketing from the cable and expose one inch of the insulated wire conductors. Do not remove any insulation from the conductors. When the RJ-45 connector is crimped, the contacts ins...

...about fibre optic cables, so you can make an informed purchasing decision. • The basics of Fibre Optic Cables • The Advantages of Fibre. • Multimode vs. single-mode fibre • Simplex vs. duplex fibre patch cable. • Attenuators • Fibre Optic Cabl...

...Angled Patch Cables and Patch Panels • Space-saving solutions for high-density infrastructures • In a survey* of IT professionals, 85% said they are increasing density to: • 50%: Reduce cabinet/rack space. • 47%: Lower costs. • 38%: Save ...

...These one-of-a-kind cables give you the ability to lock down critical network ports when you need to, without buying new patch cords. • Use these high-performance cables for your everyday network connections. Then, when you need to secure networ...

...and receive pairs are crossed between Connector A to Connector B on either end of the cable. There are two standards for the pairing of Crossover cables, one for the 568-A  & 568-B and one for USOC. • Learn more: • UTP Cable and colour drift •  

...used with these cables. • OM3 and 4 are manufactured without the center defect. As networks migrated to higher speeds, VCSELS became more commonly used rather than LEDs, which have a maximum modulation rate of 622 Mbps. Because of that, LEDs...

...image quality over long cables. • You can then manually adjust the video equalisation (fine-tuning the total system response from graphics card output to your eye). • This can’t be attained with automatic equalisation based on cable length measureme...

...video or RGB coax cables, which often can’t be easily pulled through tight conduits and can be more difficult to terminate (for more on the limitations of simply extending video cabling, see below). • A bonus: In most buildings, copper cabling...