Firewire cable • Firewire • The IEEE 1394 standard is a fast, scalable, low-cost digital interface. It was conceived by Apple® Computer and developed within the IEEE 1394 Working Group. It is generally referred to as FireWire™ the Apple tradem...
...in 4-pair CAT5/CAT5e/CAT6cable, leaving the other two pairs free to transmit power for Power over Ethernet (PoE) applications. However, Gigabit Ethernet or 1000BASE-T uses all four pairs of wires, leaving no pairs free for power. So how can PoE ...
...video over CATx cable at distances greater than 30 metres. • As cable length increases, picture quality decreases. Smearing is caused by the cable attenuating high-frequency signals. The image is also dimmer because of the cable’s resistance...
...Single-Mode Fibre Optic Cable • Single-Mode Fibre Optic Cable • Multimode fibre cable has multiple modes of propagation—that is, several wavelengths of light are normally used in the fibre core. In contrast, single-mode fibre cable has only one mode...
Crossover Cable • Crossover Cable • Crossover cable is generally used for hub-to-hub connections. The send and receive pairs are crossed between Connector A to Connector B on either end of the cable. There are two standards for the pairing of ...
Cable termination • Cable termination • Carefully remove the jacketing from the cable and expose one inch of the insulated wire conductors. Do not remove any insulation from the conductors. When the RJ-45 connector is crimped, the contacts ins...
DisplayPort cable • DisplayPort cable • DisplayPort is a digital video interface that was designed by the Video Electronics Standards Association (VESA) in 2006 and has been produced since 2008. It competes directly with HDMI®. Unlike HDMI, ho...
...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...
Shopping Basket
Sign in
