Simple to use—to route signals, just turn a knob on the front panel
The micro-mirrors on these full-duplex fibre switches optically transmit data port to port.
No optical-to-electrical conversion between fibre connections. Instead, the switches use internal mirrors to optically move data between ports—technology that’s trusted and time tested!
For reliable switching in mission-critical environments, the micro-mirrors are bonded to precise positioning servos.
Ideal for government, healthcare, financial, or other applications where a private, data-sensitive network connects to a publicly accessible network.
Enable you to connect a single workstation to two or more networks or remote devices.
The latching switch latches mirror movement mechanically into a selected position and holds it there without the need for continuous electrical power.
The non-latching version falls back to C-to-A position if power is lost.
Operate transparently to signal rates, formats, and wavelengths, and don’t require an upgrade when your data protocols change or speeds increase.
Work with 62.5-/125-micron multimode.
Warranty: 1 Year Double Diamond™ Warranty (Standard)
There’s a reason why these types of manual switches continue to be the switches of choice for networking professionals everywhere: The tried-and-true optical switches perform as promised year after year.
They’re reliable because they use micro-mirrors instead of electronics to route data signals from one fibre optic port to the next. And unlike conventional electronic switches, there are no complex and vulnerable electronic circuits to monitor and protect from intrusion, component failure, or interference.
The switches are available in latching and non-latching models. The optical mirror movement on the latching version maintains the selected position even when there’s a power failure.
Compatibility — 62.5-/125-micron multimode fibre Crosstalk — -45 dB (typical) per FOTP-42 MTBF — 100,000 hours or 1,000,000 cycles Optical Loss — 0.5 dB (typical) at 1300 nm per FOTP-34 method B Sensitivity — 750 to 1440 nanometers Switching Speed — Typical: 5 msec;
Maximum: 10 msec Connectors — Fibre ports: (5) pairs of ST;
Power: (1) 3.5-mm input Power — Input: 100–240 VAC, 50–60 Hz, autosensing;
Output: 5 VDC Dimensions — 6.4H x 20.3W x 16D cm Weight — 1.8 kg
Shopping Basket
Sign in
Contact Us
