Sorry, we were unable to sign you in.
Please check your email address and password.
Your last basket is still available
The basket of your last visit to Black Box is still available.
Would you like to view the products in this basket?
The Black Box website uses cookies. By continuing the use of the Black Box website, or by pressing the agree button on the right, you consent to the use of cookies on this website.
More information.
To use the new 10-Gbps Ethernet in your fibre optic system, you need either a full-blown single-mode solution or OM3 50-/125-µm multimode cable. An OM3 system enables your new VCSEL laser-based hardware to work with the legacy LED-based hardware in your system. Additionally, an OM3 fibre optic solution gives you a simple migration path from 100 Mbps to 1 Gbps to 10 Gbps speeds. You can be confident you're installing a future-proof fibre cabling system!
A patch cable has three crucial components: the connector, the cable and the manufacturing process. All three areas contribute to its performance, but the manufacturing process is the most important. Black Box Quality Control guarantees the best production quality control possible along with the best cable and connectors available!
Bandwidth (MHz/Km) — 1500 @ 850 nm;
500 @ 1300 nm Bend Radius (Minimum) — 40 mm Cable Diameter — 2.8 mm Cable Type — Low-smoke zero halogen Durability — 1000 mating cycles; clean after every 25 < 0.2 dB change Fibre Type — 50-/125-μm (OM3) Insertion Loss — < 0.3 dB Operating Temperature — -40 to + 75° C
Shopping Basket
Sign in
Contact Us
